|
Individual Component
Results |
| Component Normalized Mole% |
| Component Normalized Weight% |
| Component Normalized Liquid Volume% |
| Component Gross Heating Value (BTU / ideal cu.ft., BTU / lbm,
and BTU / Gal.) |
| Component Net Heating Value (BTU / ideal cu.ft. and BTU / lbm) |
| Component Relative Gas Density |
| Component Gas Density (lbm / cu.ft.) |
| Component GPM (Gal. / 1000 cu.ft.) |
| Component Compressibility |
| Component Molecular Weight |
| Component Vapor Pressure (psia or psig) |
|
Component Relative Liquid Density |
|
Component Liquid Density (lbm / gal.) |
|
Total Results |
| *Total Raw (unnormalized) Amount |
Water Mole Fraction and Mole%
(Saturated at base conditions or at a specified flowing temperature and
pressure) |
| *Gross Heating Value (BTU / ideal and real cu.ft., BTU / lbm, and
BTU / gal.) |
| Net Heating Value (BTU / ideal and real cu.ft. and BTU / lbm) |
| Relative Gas Density (ideal and real) |
| Gas Density (lbm / ideal and real cu.ft.) |
| Compressibility (Z) factor |
| Total GPM |
| *Total Molecular Weight |
| Wobbe Index |
| *Vapor Pressure (psia) |
| *Liquid Density (lbm / gal. and lbm / bbl) |
| *Relative Liquid Density |
| *Volume (cu.ft. / gal.) |
| *API Gravity |
| Note: All results are calculated and reported on a dry gas basis. Many results can also be calculated and
reported for a water-saturated gas and a "wet" gas. "Wet" results can either be based on an actual
measured water mole% of a partially saturated gas (entered
manually), or for a
water-saturated gas at a specified flowing temperature and
pressure using the GPA 2172-09/IGT RB8 Water Content Correlation. |
| * Results that are available for the extended (C6+)
renormalized fraction. |
